ATL

Products
 Amperex Technology Limited


+ APPLICATION + PRODUCT PHOTOS + PRODUCT SERIES + SAFETY
+ HANDLING TIPS

6. Notice for Designing Battery Pack
6.1 Pack design
  • Battery pack should have sufficient strength and battery should be protected from mechanical shock
  • No Sharp edge components should be inside the pack containing the battery.

    6.2 PCM design

  • The overcharge threshold voltage should not be exceed 4.25V
  • The over-discharge threshold voltage should not be lower than 2.30V
  • The PCM should have short protection function built inside
    • BACK   NEXT

    Last Updated
    July 22, 2005


    Copyright © 2001, All Rights Reserved, Amperex Technology Limited
    Original Site Design by Galganov